Applying or Repairing Your Vinyl Boat Lettering

Vinyl

One of the pleasures of boating, at least for me, is reading boat names! I enjoy the many humorous names and those that are a play on words. In many cases, they certainly provide a glimpse into the owner’s personality. Or, as in my case, Aquaholic, my addiction to all things related to water sports and activities.

May 24, 2023

by Marc Robic

 

One of the pleasures of boating, at least for me, is reading boat names! I enjoy the many humorous names and those that are a play on words. In many cases, they certainly provide a glimpse into the owner’s personality. Or, as in my case, Aquaholic, my addiction to all things related to water sports and activities.

Something I often notice is the size of the lettering. Some are so small, it would be hard to read the name from 50 yards away or more. So, hailing or identifying the boat becomes challenging. I remember reading many years ago that the best minimum letter size (height) is 4 inches, making it readable for a good distance.

The nice thing about applying your boat name is that it is very easy to do and does not require any special skills or tools. Plus, finding a vinyl sign maker near you is super easy. Yes, you can also order online. But if you can, support your local sign maker.  Most will have outdoor UV resistance vinyl material in a huge choice of colours. You can also have fun playing with the letter size, font design and colour, as sign makers offer a vast selection and, in most cases, can do custom changes.

One piece of advice I can share, is to order extra so you can make repairs without having to order from scratch. This is what prompted the idea for this article and YouTube video. I had one letter that was damaged on the port side. Thankfully, when I initially ordered my signage, I added two extra ones of each size. I have a smaller size on the stern.

So, I was able to easily replace the damaged letter.

Here is the step-by-step process and list of what you will need. I also created a YouTube video 

Getting started

To install your vinyl lettering, you will need the following items:
• Acetone
• 50% rubbing alcohol / water solution
• A plastic spatula
• Soapy water (Joy or Dawn are best in my book) or Windex
• Lint free paper towels

If you are removing existing lettering to change the name or for a repair, you will also need:
• Large masking tape
• Hairdryer or heat gun
• Scraper or straight edge type razor blade

If you are adding a new name on a blank area, skip to Step 4.  

VinylVinyl

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 1: If replacing or removing only a section, apply the large masking tape in a way that it will deflect the heat from the hair drying away from the adjacent letters.

 

 

 

 

 

 

 

 

 

Step 2: Using the hairdryer and straight edge razor blade, heat up the surface and slowly scrape or peel away the vinyl. 

Vinyl

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once removed, you will be left with the residual adhesive from the vinyl. 

Vinyl

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 3: Using a little acetone and a lint free towel, wipe away the residual adhesive being extra careful not to touch the adjacent letters.

Step 4: Once the residual glue is gone, clean the surface with the alcohol solution to clean the area as well as neutralize the acetone.

Vinyl

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 5: Set the boat name or letter in place using a piece of masking tape on both ends. Take time to step away and see how it looks from a distance and adjust until you like it. Now keep the sign or letter in place with a long piece of masking tape along the top edge to act as a hinge. Then, flip the sign or letter up. 

Vinyl

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 6: Apply soapy water or Windex and, using a rolling motion, slowly roll down, removing the backing paper at the same time until the sign or letter is in place.

Vinyl

 

 

 

 

 

 

 

 

 

 

 

 

Step 7: Using the plastic spatula, squeegee the excess soapy water or Windex out, taking care to squeeze out any air pockets. Once in place, peel away the top protective paper pulling straight down slowly so as not to pull the letter(s) off. Gently wipe the area dry and you’re done!

IMPORTANT: do not touch, wipe, wash or apply wax for at least 2 or 3 days. Wax will coat the letter and prevent the adhesive from curing properly.

Job completed in less than 30 minutes.

Vinyl

Now my next job, as you can see from the images, will be to replace the vinyl stripes along the hull, below the gunwales… A longer job time wise, but it is the same process.

Marc and ClaudeMarc Robic
mrobic@aol.com
INFORMATION about the writer:
Marc is a member of the Canadian Power & Sail Squadron. He and his wife sail their Catalina 270, Aquaholic 3, out of the Ile-Perrot Yacht Club in Montreal, where Marc spent 16 years as Harbour Master. They are regular Caribbean bareboat yacht charterers. With over 40-years experience, Marc is also an avid onboard do-it-yourselfer.

Related Articles

Tenderizing Your Tender – An Easy Way to Get Around!

Tenderizing Your Tender – An Easy Way to Get Around!

I’ll never forget what a sad looking boat it was – a flaccid little inflatable with a wood floor, awash in perhaps 6 inches of slimy brown water that was slowly lapping into and out of the engine cover of the fairly new 9.9 Mercury outboard. The Merc’ had been left on its side on the floor. The dinghy was half under the pier and half in the rain, tied loosely at the back of the big boat’s slip, banging against the pilings 24 hours a day.

Winterizing and End-Of-Season Check-List

Winterizing and End-Of-Season Check-List

It was always a bit sad when we “put to bed” our power-boat at the end of the cruising season. Then, one year, our favourite mechanic suggested creating a service program at the end of this season, rather than the beginning of the next one. Price savings could be had, he explained. From then on we regarded the winterizing phase for our boat as a start of the next cruising season, not the end of the current one. What follows are some ideas to make this as easy as possible — and perhaps even less expensive.

So, You Need a New Prop

So, You Need a New Prop

Being asked to contribute to an article on re-propping at this particular time was appropriate because, during a recent conversion with some colleagues, we were discussing what the most common inquiries were that we received from customers while working the boat shows, everyone agreed that propellers and re-propping was at or near the top of the list.

Video Gallery

New Boats: Beneteau Oceanis 34.1 – A Sleek, Good -Looking Delight To Sail

By Katherine Stone

There is nothing more that I enjoy than being with friends and messing about in boats. Messing about in brand-new boats on a champagne sailing day on Lake Ontario at the beginning of the summer doesn’t get any better. To have the new owner, Helmuth Strobel and Anchor Yachts dealer Pancho Jimenez aboard made it even more special, as they can also speak to what they truly enjoy about the boat. We keep our own boat in a harbour that has a long waiting list for boats over 35 feet, so this little gem would definitely fit the bill and feels like a much bigger boat. True to the spirit of the 7th generation Oceanis line, the 34.1 is built in Poland and replaces the 35.1. It is 1,000 lbs lighter, 14 cm narrower and has 29% more sail area.

Read More

Destinations

Peter Island Resort in the British Virgin Islands has Reopened

Peter Island Resort in the British Virgin Islands has opened its rebuilt and re-envisioned luxury private island in 2024 after the property closures from the Virgin Islands’ 2017 hurricane season. Peter Island Resort has been undergoing its transformation for over six years. Its evolution includes brand new and upgraded accommodations and new state-of-the-art facilities and five stellar beaches amid hundreds of acres of unspoiled tropical island.

Peter Island Yacht Club

The new Yacht Club will be a must on the itineraries of sailors, boaters and yachtsmen with a marina that can accommodate a range of vessels from power boats, sailboats and catamarans, to super yachts of up to 200 feet. Located in Sprat Bay harbor, the Yacht Club will be its own destination with a dedicated swimming pool for Yacht Club guests, Drunken Pelican restaurant and bar, a commissary, Sea Chest Boutique and a sports recreation area with pickleball, basketball and bocce ball courts and a lawn-games area. To protect the coral reef and marine life surrounding the island, moorings will be located in White Bay, Sprat Bay, Deadman’s Bay…

Read More

Lifestyle