October 29, 2010
Interchangeable Accessory System From Tallon Marine
Tallon Marine won a 2007 NMMA Innovation Award Recipient in the Hardware Fittings category for its very clever and practical Tallon Marine receiver systems. They offer both non-powered receivers and powered receivers that can be factory-installed or retrofitted in almost any type of vessel in minutes! The Tallon Marine receiver consists of a bracket that is the main platform for such accessories as beverage holders, rod holders, equipment brackets and even chart table lamps, courtesy lamps and more. Galley Guy approved!
June 22, 2010
Harken’s New Radial Winches
You could say that the winches are the engine of every large sailboat, helping the sailor to haul in far higher loads, far faster than their strength could normally manage and also trimming the sails by playing out sheet with control and precision…at least until the winch grinds or jams from salt or grit.
November 16, 2009
Attwood ‘s Water-Buster Battery-Powered Pump
A versatile pump with many uses, including removing water from dinghies alongside the dock. Three D batteries (not included) pump for 5 hours. 200gph open-flow capacity. Submersible. 42" hose stows neatly around the pump.
November 16, 2009
Pela Oil Extractor
The PELA 2000 is a scaled down version of the popular PELA 6000. With all the same convenient features, simply pump 4 to 10 times to create a powerful vacuum. Then watch the oil drain neatly into the calibrated container. The PELA 2000 is designed for those who have small jobs but don`t want to pay the higher prices of the bigger pumps.
November 16, 2009
HRO System’s Seafari 170 Mini Watermaker
Gain the luxury of high quality in a smaller capacity watermaker. The HRO Seafari 170 contains the most advanced features, equipment and benefits available on any reverse osmosis watermaker of its size. It is manufactured with a low maintenance design for easy use and simple routine service. The Seafari 170 is the most cost effective and dependable way to solve your fresh water needs. Enjoy drinking water with no worries.
November 16, 2009
Rule-Mate Bilge Pump
The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more expensive. 12 Volts DC.
November 16, 2009
PLASTIMO’s Flexible Water Tanks
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope.” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install.
November 15, 2009
Accon’s Stainless Hangers Keep Fenders In Place
Fastening fenders to the side of a boat can be tricky and time-consuming. Accon Marine's 401-R Fender Hangers enable boat owners to easily place and remove fenders without repetitive tying and untying.
November 15, 2009
Master Lock’s 3-Pack Keyed Alike Laminated Steel Padlocks w/Molded Covers
1-9/16" (40mm) wide laminated steel body for superior strength High-tech thermoplastic shell designed to withstand the elements Hardened steel shackle with molded cover
November 15, 2009
Bomar’s Flagship Series Stainless-Steel Elliptical Portlights
Style, functionality and simple installation are all features designed into the Flagship Series portlight. The elliptical portlight’s sleek design offers a large viewing area through a smoked 3/8" tinted acrylic lens. The exterior is beveled so it doesn’t collect water, allowing installation in angled cabin sides.
November 15, 2009
Seafit Stainless-Steel Samson Post
A classic, beautiful way to make large lines fast to your vessel. Top-of-the-line stainless steel with a pre-drilled stainless backing plate . 8'' x 4.5'' x 7.25''H Requires 1/2'' bolts
November 15, 2009
Fortress Anchor FX07
Precision-machined from an aluminum alloy that is as strong as steel, but only half the weight. Easy to manage weight Rustproof
November 15, 2009
Bridgeline’s Braided Dock Lines
Nylon double-braided dock l are made with 100% white nylon yard or Firestone-coloured yard and are specially designed to provide excellent strength, flexibility and colour retention. Nylon double-braid offers predictable controlled elongation, UV protection, and resists abrasion, oil, rot and mildew. Bridgeline's specially designed torque balanced construction is fully splice-able and is the ultimate choice for dock lines, anchor lines and fender lines.
November 15, 2009
Taylor Made Dock Corner Bumpers
Taylor Made dock corner bumpers protect those water toys from jarring impacts with the most unforgiving part of the dock. Marine grade PVC is strong, pliable and attractive, yet extremely functional. Avialable in white. 10-1/2 x 10-1/2 x 3-1/2
November 15, 2009
Lewmar Delta Anchor
Lewmar anchors lead the world in innovation engineering in a range that provides a solution for any anchoring requirement. The range encompasses galvanized, stainless steel, dropped forged and fabricated anchors. Each model displays unique design features making it easy to find the anchor specific to your needs.
November 15, 2009
Lofrans Cayman Windlass
Lofrans Cayman windlass features horizontal chain or rope for boats from 26-46'. Sturdy, sleek and compact. This windlass features a 1000W motor, standard manual override, all chain retrieval and separate rope capstan. Mounting studs thread discreetly into the housing. Windlass available in a white painted or anodized aluminum finish.
September 24, 2009
Colligo Marine Introduces New Synthetic Shrouds
Colligo Marine is introducing made-to-order synthetic shrouds using lashing or turnbuckle tensioning systems that are about the same cost as stainless steel but 1/6th the weight – and 1/3 the cost of comparable PBO and carbon systems.