Sneak peak: Grady-White Freedom 235, Designed for life

Grady White

Mar 12, 2020

One of the best features about a Grady-White; the look and feel is unmistakably “Grady-White” and while it’s a handsome and contemporary boat, it has a unique style that I think is designed for life. It will always be a Grady-White and the Freedom 235 feels like it will last for years.

The company has a hull design that is called the SeaV²and they say that their hull’s superior rough water performance can be attributed to the forward sections that offer a sharp “deep vee” cutting edge while the flatter aft section provides stability. The SeaV²is a “continuously variable vee” hull that delivers a soft and stable ride. Unlike other brands, a SeaV²hull design has no two places on the keel where the deadrise is the same. The vee continuously sharpens from the transom to the bow stem. ASeaV²hull with 20 degrees of deadrise at the transom will have around 30 degrees amidships—more than even the most radical older deep vee designs. The deeper vee forward means a softer ride at sea. Less vee at the transom coupled with wide chines provide stability at rest and when trolling.

Additionally, the Grady-White designs feature a high bow and what I call a “Carolina sheer” like you see on some big sport fishing yachts.

HelmPerformance 

Grady-White specifies the Freedom 235 Dual Console with the Yamaha F 300 outboard engine, Yamaha Command Link controls and SeaStar steering. The Yamaha idles silently and seems silky smooth at all speeds. We found that the boat planes off at about 3,400 RPM and 18 miles per hour but 27.9 at 3,600 RPM, which is the optimum cruising speed. Acceleration to planning speed times at about six seconds and there is plenty of power for towed sports or planning off a group of passengers. 

Out in the bay, we found it heels over hard and turns well at speed. The ride is tops –very solid and a great boat for Georgian Bay or the Great Lakes as well as saltwater use.

Read Andy Adams’ complete review of the Grady-White Freedom 235 in the April edition of Canadian Yachting.

Related Articles


RANGER TUGS R-27

By Andy Adams

Ranger Tugs have been around since 1958 and they have developed a great formula: one boat, one price. Almost everything is included, and there is literally a fan club of owners who share stories, information and who set up events and rendezvous with other Ranger Tugs owners. www.Tugnuts.com is a community hub for owners of Ranger Tugs, Cutwater Boats and Solara Boats, all made by Fluid Motion!

Tugnuts.com is quite a unique resource. The online forum has quick links to a chat, info about cruises & gatherings, a channel to ask questions of the Ranger Tugs Factory, Ranger Tugs Technical Discussions, “How to” videos and more.

Read More


Destinations

Sailing into the Future at Antigua Sailing Week

By Mathew Channer

“Standby tack,” Canadian sailor Katy Campbell orders. The crew scrambles over the sheet lines and braces on the deck.

“Three, two, one, tack!”

I wait until the bow turns into the wind and the headsail snaps over, then crawl over the cabin top of Panacea X to the now windward side. The trim team smoothly sheets on the headsail and a competitor vessel shoots past our stern, feet away, as our Solana 45 beats eastward along Antigua’s south coast.

Read More